
- Images
- Videos
- 360°
MP360 Planer / Moulder

4 Cutting Heads
Four cutting heads plane & mould boards on all 4 sides in a single pass into a variety of finished products.

Five Feed Rollers
Four steel and one polyurethane power roller steadily move the board through the machine.





Large Capacity, Small Footprint
The MP360 features a larger material capacity than the MP260 with up to 20” (510 mm) wide x 9” (230 mm) high one-sided planing/moulding capacity, 16” (410 mm) wide x 9” (230 mm) high 2-sided planing/moulding capacity, and a large 13-3/4” (350 mm) wide x 2” (50 mm) high 4-sided planing/moulding capacity in one compact machine. The MP360 side cutters can be upgraded to 4" (100 mm), 5" (130 mm), or 6" (160 mm) to increase the height capacity for 4-sided processing. The 6" (160 mm) side cutter requires an additional spindle extension.





Large Viewing Window
A large viewing window allows the operator to supervise the entire cutting process from rough sawn boards to final products. Inside the machine, the top and bottom horizontal cutters and two vertical side cutters process the material at 6,000 rpm to ensure a smooth and consistent finish on one, two, three, or all four sides depending on which cutters are activated.
4-sided Moulding Capacity | |
---|---|
Max. Width - 4 Sided Planing | 350mm |
Max. Height - 4 Sided Planing | 160mm (6") |
2-sided Moulding Capacity | |
Max. Width - 2 Sided Planing | 410mm (16 1/8") |
Max. Height - 2 Sided Planing | 230 mm (9") |
1-sided Moulding or Thicknessing Capacity | |
Max. Width - 1 Sided Planing | 510mm (20") |
Max. Height - 1 Sided Planing | 230mm (9") |
Features & Options | |
Number of Horizontal Cutters | 2 |
Number of Spindles | 3 |
Number of Sawdust Extraction Ports | 4 |
Viewing Window | Yes |
Options | Support Rollers Infeed Table 2m (78") Board Fence Extensions |
Upper Horizontal Cutter | |
Upper Horizontal Cutter Diameter | 88mm (3 7/16") |
Upper Horizontal Cutter Width | 510 mm (20") |
Upper Horizontal Cutter Power | 5.5kW |
Upper Horizontal Cutter Speed | 6000rpm / 50Hz |
Upper Horizontal Cutter Max Cutting Depth | 8mm (5/16") |
Upper Horizontal Cutter Max Profile Depth | 20mm (3/4") |
Lower Horizontal Cutter | |
Lower Horizontal Cutter Diameter | 72mm (2 13/16") |
Lower Horizontal Cutter Width | 410mm (16 1/8") |
Lower Horizontal Cutter Power | 4kW |
Lower Horizontal Cutter Speed | 6000rpm |
Lower Horizontal Cutter Cutting Depth | 0-8mm (0-5/16") |
Lower Horizontal Cutter Profile Depth | max 10mm (3/8") (slot drill 15mm (1/2") |
Vertical Cutters | |
Vertical Cutters Spindle Diameter | 30mm (1 3/16") |
Vertical Cutters Max Cutter Height | 160mm (6 1/4") |
Vertical Cutters Max Diameter | 140mm (5 1/2") |
Vertical Cutters Power | 3kW |
Vertical Cutters Rotation Speed | 6000rpm |
Vertical Cutters Max Cutting Depth | 30mm (1 3/16") |
Standard Vertical Cutters Included | |
Type | TB90 |
Diameter | 90 mm (3.5") |
Height | 40 mm (1.5") |
Knife Type | HSS |
Knife Width | 50mm (2") |
Power Feed | |
Feed Motor | 0.75kW (1HP) |
Feed Speed | 3-15 m/min 50Hz |
Feed Rollers | 4 Steel + 1 Polyurethane Rollers 5 Polyurethane Rollers (Optional) |
Dimensions & Weight | |
Length | 2,970 mm (9'9") |
Width | 1125 mm (44 1/4") |
Height | 1430mm (56 1/4") |
Weight | 675kg (1488 lbs) |
Shipment Weight | 740kg (1,600lbs) |
Machine Standards & Requirements | |
Total Power | 16.25kW |
Electrical Requirements | 3-phase, 400 V, 20-32 A 3-phase, 230 V, 32-50 A |
Sawdust collection port diameter | 3 x 100 mm + 1 x 125 mm |
Safety Standards | CE |